DAWAKHANA TIBBIYA COLLEGE

ALIGARH MUSLIM UNIVERSITY, ALIGARH

NOTICE CALLING FOR QUOTATION / TENDER

No   BS-01                                                                    DATED  14/12/2017

M/s……………………………………………………………………………………………………………………

…………………………………………………………………………………………………………………………

Dear Sir,

Sealed quotation / tenders are invited for the following items on the terms & condition as noted below.

For all item tender fee (Non-Refundable) = Rs.500/- to company with closed and sealed quotations through courier/ speed post on or before 06.01.2018 BY 05.00 PM

Vendor to list the past work along with client name and phone no.

Minimum 05 years experience required in all relevant field.

For any information please visit the site at New Dawakhana Qila Road, Aligarh

For any changes from the side of vendor, needs approval from Dawakhana Tibbiya College.

EMD are as follows:

For all  Shed : Rs. 40,000/- (Refundable)

For Electricity: Rs.10,000/- (Refundable)

For Plumbing : Rs. 25,000/- (Refundable)

For RCC Work : Rs. 15,000/- (Refundable)

For more inquiry please mail : af@amudawakhana.com

A)- SHED

1- BOILER SHED

Area of Boiler shed = 8643 sqr. Ft.

Height from ground level = 40 feet

Clear Height = 34 feet approx.

Shape of area is in triangle.

Structure

  • Column made by 3” Dia Apollo Pipe M.S. (Black Painted)
  • Each Column will be placed on at a distance of 10 feet approx.
  • Joining of Column will be done by Plate and Bolt
  • 10mm thickness MS Plate will be fixed for bolting at the base.
  • Side supports will be 2” * 2” MS Pipe for column
  • Each footing will be 1’6” * 1’6” * 4’
  • Total no. of footing approx. 45.
  • Sheet make = Bhushan (Coated)
  • Purling Structure made by Box (4” * 2”) Black Painted
  • Trusses (2” * 2”)
  • High tension bolts with appropriate metal bars will be used.
  • Truss will be made with MS pipes 4” * 2” and 2” * 2” for internal support.
  • Each truss will be fitted on the columns with a metal plate of 5mm thickness.
  • Purling will be welded together and made of 2” * 2” pipes.
  • Painted Black
  • Sheet will be installed for the sides only.
  • Sheet will be of 0.5mm thickness and powder coated.
  • Self threading metal screws will be used of 2” length.
  • 10 Nos. wind turbines for exhaust will be fitted.
  • Self threading metal screws will be used of 2” length.

Note :

  • The sheet make should be Bhushan
  • Pipes Make (Apollo)
  • No. of trusses and purling decided by the vendor according to the structure strength.

 

2-  HVAC SHED

Structure

  • Metal structure 2407.2 SQF.
  • Sides of the structure will be made of 2” * 2” MS Box.
  • Shape of the area is rectangle.
  • Grouting will be done by metal fasteners and plates of 8mm thickness.
  • Purling’s will be made of 2” * 2” MS Box.
  • Structure will be painted black.
  • One door 3’ * 7’ Board with Mica.
  • Roof height 15’.
  • Sheet will be 0.5mm thickness and powder coated.
  • Self threading metal screws will be used of 2” length.
  • Joining of the column will be done by plates and bolts.
  • 05 Nos. wind turbines for exhaust will be fitted.

Note :

  • The sheet make should be Bhushan
  • Pipes Make (Apollo)
  • No.of box decided by the vendor according to the structure strength.

3- R.O. AND AIR COMPRESSOR SHED

 

  • Area 900 sqr feet
  • Height 15 ft
  • Shape of the area is rectangle.
  • Sheet will be 0.5mm thickness and powder coated.
  • Self threading metal screws will be used of 2” length.
  • 01 door 3’ * 7’ Board with Mica
  • Structure will be made of 2” * 2” MS Box
  • Grounding will be done by Metal fasteners and plates of 8mm thickness.
  • Structure will be painted black.
  • Purling will be made of 2” * 2” MS Box.
  • 3 Nos. wind turbines for exhaust will be fitted.
  • Joining of the column will be done by plates and bolts.

Note :

  • The sheet make should be Bhushan
  • Pipes Make (Apollo)
  • No.of box decided by the vendor according to the structure strength.

04 PORTA CABIN FOR BOILER

  • Area 300 sqr. ft.
  • Height 10’ (Internal Height)
  • Shape Rectangular.
  • Interior Wall (PVC Panel Make)
  • Exterior Wall Powder coded 0.5 mm thickness (Make Bhooshan)
  • Observer window made by clear glass 3’ * 6’, 03Nos.
  • Ceiling of cabin made grid type with glass wood.
  • Fitting / space for split A.C.

B)- SPECIFICATION FOR BOILER AREA RCC WORK

  • 750 sqr mtr
  • 150 mm RCC (1:1.5:2 M20)
  • Reinforcement 08mm bar, 250 mm c/c
  • Work including trimix work with flor harder (Fosroc)
  • Hardener should be 4kg/sqr mtr. in R.C.C.
  • Grove cutting 4*4 with chemical filling in whole area.

C)- SPECIFICATION FOR PLUMBING WORK

 

S.NO. DESCRIPTION QTY UNIT
1.0  WATER SUPPLY  
     
1.1 Providing, jointing and fixing CPVC Cold and Hot Water Supply System.  
  The work shall be done as per technical specifications and in general shall include:  
  Material: Upto 2 inch dia — CPVC pipes and fittings conforming to IS: 15778:2007 of SDR 11 Grade.
Above 2 inch dia — CPVC pipes and fittings of Schedule 40.
 
  Fittings shall include all  standard moulded fittings elbows, tees, couplers, reducers, unions,  plugs, adaptors with brass threaded insertions and specials.  
  Jointing: Solvent cement jointing. The Solvent Cement shall be of make and grade as specified by the manufacturer of CPVC piping system  
  Installation, Testing and Commissioning: The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good, etc The entire CPVC piping system shall be installed, tested and commissioned following the recommendation of the manufacturer  
  M.S Supports: All pipework in shafts, ceiling voids and terrace shall be fixed on MS brackets and hangers with U-clamps made from 10 mm dia galvanised steel rod complete with nuts and washers. Cost for MS structural work for supports shall be included in the rates  
   
  Making Good the Structure Crossings: For all horizontal and vertical crossings of building structure ( slabs, walls, beams, column etc), the space between pipe and the structure shall be made good and water tight with concrete. The annular space between the pipe and the sleeves shall be sealed (upto a minimum depth 25 mm) with fire resistant acrylic based sealent of approved make and quality. (MAKE : ASHIRVAD /  ASTRAL- SDR-11)  
     
   3/4″ N.D.(SDR 11 Rated ) 50 M
   
1.2 Providing, jointing and fixing  CPVC Cold and Hot Water Supply System.  
  The work shall be done as per technical specifications and in general shall include:  
  Material: Above 2 inch dia — CPVC pipes and fittings of Schedule 40.
Basic Raw Material of Pipe work – CORZAN of Lubrizol Inc. USA.
 
     
1.2 contd. Fittings shall include all  standard moulded fittings elbows, tees, couplers, reducers, unions,  plugs, adaptors with brass threaded insertions and specials.  
  Jointing: Solvent cement jointing. The Solvent Cement shall be of make and grade as specified by the manufacturer of CPVC piping system  
  Installation, Testing and Commissioning: The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good, etc The entire CPVC piping system shall be installed, tested and commissioned following the recommendation of the manufacturer  including provision of expansion loops  
  M.S Supports: All pipework in shafts, ceiling voids and terrace shall be fixed on MS brackets and hangers with U-clamps made from 10 mm dia galvanised steel rod complete with nuts and washers. Cost for MS structural work for supports shall be included in the rates  
  Making Good the Structure Crossings: For all horizontal and vertical crossings of building structure (slabs, walls, beams, column etc), the space between pipe and the structure shall be made good and water tight with concrete. The annular space between the pipe and the sleeves shall be sealed (upto a minimum depth 25 mm) with fire resistant acrylic based sealent of approved make and quality. (MAKE : ASHIRVAD /  ASTRAL- SCH-40)  
   
  a) 2 1/2″ N.D. 280 M
   b) 2” ND, UPVC-SCH-80   Rmt
1.3 Providing, fixing, testing and commissioning of Full Bore Ball Valves  of approved makes. (MAKE : ZOLOTO, ARCO, SKS)  
  MOC:  
  Body        : Nickel plated brass  
  Ball          : Chrome plated brass  
  Washers  : PTFE  
  Operating Handle : Aluminium Painted  
  Pressure Rating : Minimum 20 Bar  
  Temerature Withstanding : 900 C Min.  
  a) 15 mm dia 44 No.
  b)  50 mm dia 2 No.
   
1.4 Providing and fixing Cast Iron  butterfly valve of approved make and as per following specification: (MAKE : ZOLOTO, ADVANCE, SANT)  
  MOC:  
  Body – Cast Iron  
  Shaft – Carbon Steel / Stainless Steel  
  Body Liner – EPDM/ nitrile rubber  
  Disc – Epoxy coated C.I./ D.I.  
   
  a) 65 mm dia (PN16) 2 No.
  b) 80 mm dia (PN16) 2 No.
   
1.5 Providing and fixing high density Polyethelene (Sintex type) single piece water storage tanks with cover, inlet and outlet, scour and overflow & vent connections shall be provided with mosquito proof wire mesh couplings of following capacity :  (MAKE: SINTEX)  
   
  Per ltr. 5000 Ltr
   
2.0 SEWERAGE AND DRAINAGE  (AROUND BUILDING)  
     
2.1 Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1 : 5 ( 1 cement : 5 fine sand ) RCC top slab with 1  : 2 : 4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) earth work, excavation in all kinds of soil, foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside and outside plastering 12 mm thick with cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design :  
  a) Inside size 90 x 80 cm and 60 cm deep including C.I. cover and frame (double seal) 455 x 610 mm internal dimensions; total weight of cover and frame to be not less than 75 kg. with F.P.S bricks. 3 No.
   
   
2.2 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 M  (In all kinds of soil).  
  a) Exceeding 80 mm dia. but not exceeding 300 mm dia. 380 M
   
SUBHEAD  :   PART B- PUMPING MACHINERY    
  IMPORTANT NOTES :  
  1) The pump shall be capable of developing the required total head at rated capacity for continuous operation. The pumps shall operate satisfactorily at any point on the  Head-Discharge (H-Q) characteristic curve over a range of 50% to 130% capacity  
  2)  The total head capacity curve shall be continuously rising towards the shut off. The shut off head shall be at least 110% of the total head. The pump should deliver at least 125% of its rated capacity at 75% of the specified total head  
  3)  All associated piping, valves & other appurtenances shall be paid seperately as per relevant items  
  4)  Wherever mechanical seal has been asked for, it must be `factory fitted` at pump manufacturer`s works.  
  5)  The Tenderer must submit along with his offer, the make and the model of the pump unit proposed by him. The tenderer must mention clearly wherever he is offering alternative material of construction for various types of pumps.  
  6) Required power supply would be made available at pump control panel  in the plant room by other agency  
     
1.0 PUMPS  
   
1.1 Supply, installing, testing and commissioning of R.O. water transfer pumps  as per following details:    
  The pump unit shall be complete with : (MAKE: KIRLOSKAR, MATHER+PLATE)  
   
  a) Pumps: Horizontal / vertical monoblock booster pumpset with mechanical seal  
1.1                  : Shaft      — Stainless Steel  
contd.  Motor:        2900 RPM; 3Ph 415V 50Hz  
                     Insulation Class – B Min  
                     Protection – IP44 Min.  
  Duty:  
  Discharge             :  14 M3/hr.  
  Working Head       : 30 M 2 Set
   
     
2.0 CABLING AND MAIN PANEL  
     
2.1 Supplying and fixing of following types and sizes of 1.1 KV grade PVC insulated conductor armoured cable conforming to IS : 1554. (MAKE: HAVELS, POLYCAB)  
  a) 3C  4 sq.mm. Copper conductor 15 M
  b) 4C  2.5 sq.mm. Copper conductor 15 M
   
2.2 Supplying, laying & terminating of following types and size of 1.1 KV grade PVC isulated armoured control cables conforming to IS : 1554 Part-II   (MAKE: HAVELS, POLYCAB)  
  a) 6C 1.5 sq.mm.Cu. Conductor 50 M
   
2.3 Supplying and making end termination with brass single compression glands and copper/aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE copper/aluminium conductor cable of 1.1 KV grade as required :  
  a) 3C  4 sq.mm. Copper conductor 4 Set
  b) 4C  2.5 sq.mm. Copper conductor 2 Set
   
2.4 Supply, fabricating and installing following size of perforated M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting etc. as required : (MAKE : ISI STANDARD)  
   
  a) 100 mm. width x 40 mm. depth x 1.6 mm. thickness 8 M
   
2.5 Supply, installation, testing and commissioning of electric distribution board,  metal clad cubicle type suitable for 415V AC single phase 50Hz supply system. The panel shall be  completely compartmentalised and complete with Copper Bus Bars, designation labels as per requirement, continuous earth bar, panel separators,  protective screens, cable clamping support system, top/bottom cable gland plates for  incoming and out going cable entries as per details given below:  
  MAIN PANEL  – PUMP ROOM  
     
  INCOMER  
2.5 contd. 63A FP MCCB of 25KA with phase spreader and extended rotary handles –  1 No. 1 Set
  INSTRUMENTS FOR INCOMER  
   
3.0 PIPE WORK AND VALVES  
   
3.1 Providing and fixing in position the medium class (Class B) G.I. pipes (IS:1239)(Pipe work restricted within the plant room for suction and delivery headers of pumps)  (MAKE : TATA / JINDAL HISSAR)  
   
  a) 80 mm dia pipe 12 M
  b) 65 mm dia pipe 30 M
  c) 50 mm dia pipe 12 M
  d) 40 mm dia pipe 12 M
   
     
3.2 Providing and fixing butterfly valve of approved make  including a set of MS flanges, required nos. of nut & bolts all complete and as per following specification:(MAKE : ZOLOTO, ADVANCE, SANT)  
  MOC:  
  Body – Cast Iron  
  Shaft – Carbon Steel / Stainless Steel  
  Body Liner – EPDM/ nitrile rubber  
  Disc – Epoxy coated C.I./ D.I.  
  a) 80 mm dia ( with lever) (PN 16) 2 No.
  b) 65 mm dia ( with lever) (PN 16) 2 No.
  c) 50 mm dia ( with lever) (PN 16) 2 No.
   
3.3 Providing and fixing flanged end Wafer type check valve (non return valve) of Class PN 10, having stainless steel body and disc, trim and spring of approved make, including a set of MS flanges, required nos. of nut & bolts all complete.(for submersible pumps) (MAKE : ZOLOTO, ADVANCE, SANT)  
  a) 50 mm dia 2 No.
     
3.4 Providing and fixing of nickel plated brass/ nonferrous alloy fullyway ball valve ( minimum working pressure of 20 bar ) with operating handle of approved make. (MAKE : ZOLOTO, ARCO, SKS)  
   
  50 mm dia 2 No.
   
3.5 Providing and fixing heavy duty resilient rubber neoprene lined single arch vibration eliminators suitable for raw water up to 70 deg.C temperature, pressure upto 15 Bar and vacuum rating upto 700 mm Hg.  
   
  a) 65 mm dia 2 No.
  b) 50 mm dia 2 No.
   
3.6 Supplying, installation, setting, testing and commissioning of differential type pressure switches for operation of pumps.(MAKE : DONFOSS, INDOFOSS) 2 No
   
3.7 Supplying, installation, setting, testing and commissioning of pressure gauge with isolation cock, all complete(MAKE : H-GURU) 2 No
   
 4.0 SS PIPE FITTING FOR RO  
4.1 Providing and fixing Stainless Steel  pipes Make- Jindal Sanpress Inox confirming to EN 10312 Material No.1.4401(X5 CrNiMo 17-12-2) with 2.3% Mo(S.S.Grade-316) ,complete with  Press Type fittings Make- Jindal Sanpress Inox Material No.1.4408  suitable for doubley secure pressing (two pressings simultaneously– one in front of the crimp and one behind it) for torsion proof and longtitudinally forcelocked connection.with Black; EPDM Sealing Element with SC-Contur in accordance with DVGW regulation W534, DW 8501 BL 0551, DW 8511 BQ 0245)  for Hot and Cold water supply  capable to withstand temprature up to 110 degree centrigrade and working pressure 16 bar,  such as sockets, bends,  elbows, tees, reducers, unions, Flanges etc. necessary adapters for GI/Copper and CP fittings.Clamps with hanger at a spacing  as required, jointing, sundries, cutting holes in walls/floors/slabs & making good complete.  - FOR RO WATER   (MAKE : JINDAL & VEIGA)  
  a)    22 mm nominal outer dia pipes 50 Rmt
  b)    54 mm nominal outer dia pipes 205 Rmt
c)     65 mm nominal outer dia pipes 04 Rmt
  d)    80 mm nominal outer dia pipes  20 Rmt
4.2 Providing and fixing brass ball cock for ground level water tank  
80 mm dia 1 Nos
 4.3 Supplying, laying, fixing, testing and commissioning of following sizes (NB) of ISI marked heavy class M.S. pipes conforming to IS: 1239  including cutting, threading, welding etc. and providing all fittings e.g. elbows, reducers, clamps, hangers, flanges, gaskets, nuts, bolts and washers etc. including painting of pipes and fittings with red paint over a coat of ready mixed primer, both of approved quality and shade including cutting holes and chases in brick or  RCC walls/ slabs and making good the same etc. complete in all respect as required (for cooling tower purpose) MAKE : TATA/ JINDAL HISSAR)
a 125 mm dia Rmt
b 100 mm dia Rmt
c 80 mm dia Rmt
d 65 mm dia Rmt
e 50mm dia Rmt
f 40 mm dia Rmt
g 32 mm dia Rmt
h 25 mm dia Rmt

Note :

  • Please visit the site for any information.
  • Dawakhana has authorized for any further changes in design.

 

D)-  SPECIFICATION FOR ELECTRICAL WORK

 

SR.
NO.
ITEM DESCRIPTION UNIT QTY. RATE AMOUNT MAKE
1.0  Removing and re-fixing cable trays in Dimagheen, Syrup and Joshanda Room Shift  into passage area. Job 1  
2.0 Boiler Running load : 65 HP  
       
2.01 SITC of 3.5Cx70sq.mm  AL. conductor Armoured Cable(for 65 HP Boiler Runing Load) Mtr. 30 POLYCAB
  Supply and making terminal joints for the following sizes of 1.1KV grade XLPE Insulated armoured AL. conductor cables including providing heavy duty AL. terminal lugs, crimping type, insulation tape, heavy duty double compression type brass glands.    
2.02 3.5Cx70 sqmm AL. Cond. Armoured cable Each 2 COMET
     
3.0  Syrup filling Line Load are as follow:    
1 Turn table 01No 0.5 HP    
2 AirJect 01No 2.5 HP    
3 Monoblock Model 01No 3.5 HP    
4 On line inspection 01No 0.5 HP    
5 Gum Labeling Machine 01No 2HP    
6 Packing Conyers belt 01No 1HP    
                                                                      Total 06 NOS 10 HP    
   WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
           
4.0   Dimagheen Filling Line Load are as follow :        
1 Turn table 01No 0.5 HP    
2 AirJect 01No 2.5 HP    
3 Four head filling machine 01No 2 HP    
4 Four head screw capping 01No 1.5 HP    
5 Induction cap sealing 01No 0.5HP    
6 Packing Conyers belt 01No 1HP    
7 Sticker labeling 01NO 0.5 HP    
8 Packing conveyor belt 01No 1 HP    
                                                                           Total 8 8.5 HP    
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
           
5.0  Dimagheen Department        
1 Boiling pan 03Nos 3 HP    
2 Dimagheen Manufacturing Vessel i) 3000 ltr 50 HP common point for both    
ii)1000 ltr    
3 Dimagheen storage Vessel i) 3000 ltr 12 HP common point for both    
ii)1000 ltr    
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
   
6.0  Syrup Department                
1 Syrup Manufacturing Vessel and Storage Vessel. Capacity: 3000 ltr 15 HP    
2 Syrup Manufacturing Vessel and Storage Vessel. Capacity: 1000 ltr 12 HP    
   
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
   
7.0 Joshanda Department                
1 Joshanda Preparation 05 Nos 25 HP    
1.01  WALL MOUNT PANEL AS ABOVE. Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
   
8.0  HVAC          
8.01 Supply, handling, laying effecting proper connections testing and commissioning of following sizes of 1.1 KV grade XLPE insulated Copper conductor cables laid over MS supports cable trays or fixing on walls including clamping the cable .      
S.No Area (nom.)sqmm Length in (mm) Qty    
1 4 Core 6 sqmm copper armoured cable 36900 1    
29010 1 Mtr. 140 POLYCAB
24810 1    
21340 1    
16480 1    
2 4 Core 4 sqmm copper armoured cable 14155 1    
17530 1    
14160 1 Mtr. 90 POLYCAB
29210 1    
                                                                  Total nos of Cable   9    
         
8.02 Supply and making terminal joints for the following sizes of 1.1KV grade XLPE Insulated armoured Copper conductor cables including providing heavy duty tinned coper terminal lugs, crimping type, insulation tape, heavy duty double compression type brass glands.        
         
1 4 Core 6 sqmm copper armoured cable     Each 12 COMET
         
2 4 Core 4 sqmm copper armoured cable     Each 10 COMET
         
Note: Earthing supply to each HVAC control panels will be in.        
   
SITC of 40mm Dia 3.0 Mtr. Long GI Pipe earthing for HVAC Control Panels Each 6  
   
Providing and fixing in position the following sizes of earthing strips  including providing all fixing accessories and effecting proper connections as required.    
   
a 50 x 6 mm GI FLAT Mtr. 30  
b 25 x 6 mm  GI FLAT Mtr. 30  
   
9.0  Submersible Load- 02 Nos – 05 HP (each).        
           
9.1 SITC of 40 amp. 4pole MCB in MS Enclosure Box. For  Submersible Load. Each 2 ABB
Cable (Cu) Rmt  
10.0  Grinding area load and cable description.        
1 Herbal Grinding section                              01no 50 HP 70 sqmm (Cu)    
                                                                   01no 50 HP 70 sqmm (Cu)    
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
         
SITC of 3.5Cx70sq.mm  CU. conductor Armoured Cable( FOR GRINDING AREA Load) (EXTRA ITEM)     Mtr. RO POLYCAB
Supply and making terminal joints for the following sizes of 1.1KV grade XLPE Insulated armoured Copper conductor cables including providing heavy duty tinned coper terminal lugs, crimping type, insulation tape, heavy duty double compression type brass glands.        
3.5Core 70 sqmm copper armoured cable (EXTRA ITEM)     Each RO COMET
2 Herbal Cleaning                                         01no 03 HP 6 sqmm 3.5 core (Cu)    
                                                                   01no 03 HP 6 sqmm 3.5 core (Cu)    
   
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
         
SITC of 4Cx6sq.mm  CU. conductor Armoured Cable( FOR GRINDING AREA Load)     Mtr. RO POLYCAB
         
 END TERMINATION OF 4 Core 6 sqmm copper armoured cable     Each RO COMET
         
   
11.0 Supply,Installation,Testing and Commissioning of following sizes pre-peainted Perforated cable tray along with bends,tees,elbows,with  required along with supports,anchor fasteners to support the tray all complete to suspend the tray properly.    
1 200x50x1.6mm thick (without cover) Mtr. 75 MEM
   
2 150x50x1.6mm thick (without cover) Mtr. 75 MEM
   
12.0 Doom Type Industrial light (Suggested by Pharma Machine Design Consultant) approx. 15 Nos regarding Joshanda, Dimagheen and Boiler area. (100 w Each)     Each 15 BAJAJ
     
13.0 LED LIGHT  600X600MM, (Power 40W) , Lumen- 3000 lm, ceiling light . Each 100 BAJAJ
13.01 LED LIGHT 300X300MM, (Power 40W) , Lumen- 3000 lm False- ceiling light . Each 25 BAJAJ
     
14 Cooling Tower  (01 Nos.) 3 HP          
5 HP          
                 
14.1 Cable (Cu)     Rmt        
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
15 Ro (01 nos.) 5 HP          
15.1 Cable (Cu)     Rmt        
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
16 AIR COMPRESSOR 10 HP          
16.1 Cable (Cu)     Rmt        
 WALL MOUNT PANEL AS ABOVE.     Each 1 SAMPOORANA SWITCHGEAR PVT. LTD/KVA POWE SOLUTION
TOTAL   0.00  
   
ADD GST @ 18%   0  
  GRAND TOTAL   0.00  
   
Note:- All MCB/MCCB shall be L&T/ABB Make for Panels.

 

 

 

TERMS & CONDITIONS 

  1. Goods are required to be dispatched F.O.R. Dawakhana Tibbiya College, A.M.U Aligarh.
  2. Quotation will be sent in the name of Chairman Purchase Committee , Dawakhana Tibbiya College, A.M.U., Aligarh.
  3. Dawakhana has the right to accept the rates of some or all the articles required.
  4. Dawakhana reserves the right to reject any or all the quotation without assigning any reason.
  5. Payment shall be made against the bill through Accounts payee cheque.
  6. In case goods are not according to specification, the cost or returning the same shall be borne by the supplier.
  7. The goods will have to be supplied within the time period mentioned in order.
  8. The period of validity of rates will be 90 days from the date of approval.
  9. The quotation containing over writing/cutting are likely to be rejected.
  10. The firm should mention GSTIN No.
  11. The discount / rebate may be quoted.
  12. Other incidental charges such as packing, forwarding, Insurance etc. may be indicated clearly.

 

 

       General Manager           

       Dawakhana Tibbiya College

        A.M.U., Aligarh

************************************************************************************************************